How It Works

Set up and installation are easy! Simply plug your computer, high-speed Internet connection and standard household phone into the provided Linksys® adapter. Calls are made and received the same way you would with any other telephone – simply pick it up and dial the number you wish to call.

PAP2T Phone Adapter Installation

The package contents include:

> Internet Phone Adapter with 2 Ports for Voice-over-IP
> Power Adapter (may require assembly)
> Network Cable
> Quick Installation Guide

Before you begin make certain that you have the following:

> An active TouchTone VoIP account and an active Internet connection
> Analog telephone(s) or fax machine(s)
> At least one computer for configuration of the Phone Adapter

Instructions:
1. Connect the included Ethernet network cable to the INTERNET port of the Phone Adapter (provided). Connect the other end to one of your router's Ethernet ports.
2. Connect the included power adapter to the POWER port of the Internet Phone Adapter. Connect the other end to an electrical outlet. IMPORTANT: Do not connect the PHONE port to the telephone wall jack. Be certain to only connect a telephone or fax machine to the PHONE port, otherwise, the Phone Adapter or the telephone wiring in your home may be damaged.
3. Using a telephone cable, connect your telephone to the PHONE 1 port of the Internet Phone Adapter.
4. If you have a second TouchTone VoIP account, then connect another telephone or fax machine to PHONE 2 port of the Internet Phone Adapter.
5. The Power, Ethernet, and Phone LEDs will be solidly lit when the Internet Phone Adapter is ready to use.
6. To connect to the Internet, follow the instructions provided by your Internet Service Provider.

You have now successfully completed installation. You can now pick up the phone and make calls!

For additional information or troubleshooting help, please refer to the User Guides provided to you in your package, or you can call TouchTone Customer Service at 800-266-4006.

SPA2102 Phone Adapter Installation

The package contents include:

> Internet Phone Adapter with Router
> Ethernet Cable
> Power Adapter
> Quick Installation and Compliance Guide

Before you begin make certain that you have the following:

> An active TouchTone VoIP account and an active Internet connection
> Analog telephone(s) or fax machine(s)
> At least one computer for configuration of the Phone Adapter

Instructions:
1. Connect one end of the RJ-11 phone cable to the Phone Adapter's PHONE 1 port.
2. Connect the other end to your analog telephone or fax machine. IMPORTANT: Do not connect the PHONE port to the telephone wall jack. Be certain to only connect a telephone or fax machine to the PHONE port, otherwise, the Phone Adapter or the telephone wiring in your home may be damaged.
3. Repeat steps 1-2 with the PHONE 2 port.
4. Disconnect your pC from the modem. You will use the Ethernet network cable in the next step.
5. Connect the Ethernet network cable to the Ethernet port of the Phone Adapter. Now connect the other end to the Ethernet network port of your PC.
6. Connect one end of the Ethernet network cable (included) to the Internet port of the Phone Adapter. Now connect the other end to your broadband modem.

7. Connect the power adapter (included) to the Power port of the Phone Adapter, and then plug the power adapter into an electrical outlet.

NOTE: Make sure that your PC's Ethernet adapter is set to obtain an IP address automatically. For more information, refer to Windows Help.

You have now successfully completed installation. If you need to configure the Phone Adapter, please refer to the Quick Installation and Compliance Guide.

For additional information or troubleshooting help, please refer to the User Guides provided to you in your package, or you can call TouchTone Customer Service at 800-266-4006.